Zu Produktinformationen springen
1 von 3

TW1161CNL 10/100 Base-T RJ45 MagJack, Tab Down, ohne LEDs

Der TeleWire Technology TW1161CNL ist ein 10/100 Base-T RJ45 MagJack mit EMI-Abschirmfedern und integrierter Magnetik. Hergestellt in Taiwan.

Querverweise

  • Pulse J00-0025NL — der TW1161CNL ist ein direkter Ersatz für dieses Bauteil.
  • LINK-PP LPJ0050CNL — gleiches Footprint, hergestellt außerhalb von Festlandchina.

Auswahlhinweise

  • 10/100 Base-T — die Übertragungsrate, für die der interne Transformator ausgelegt ist.
  • Ohne LEDs — die gesamte Frontöffnung bleibt für den passenden Stecker frei.
  • Integrierte Magnetik — der Transformator befindet sich im Gehäuse, was Platz auf der Platine neben dem PHY spart.
  • EMI-Erdungsfedern — Federkontakte verbinden das Gehäuse beim Einsetzen mit dem Panel.

Typische Anwendung: Gebäudeleittechnik und Sensor-Gateways für 10/100-Verbindungen.

Die Preise für den TW1161CNL liegen je nach Bestellmenge und Konfiguration zwischen 0,50 $ und 3,00 $ USD; Mengenstaffeln sind auf Anfrage erhältlich.

Überprüfen Sie den TW1161CNL zuerst auf Ihrer Platine. Muster sind für die Designvalidierung verfügbar, und die mechanische Zeichnung zeigt das Footprint, bevor Sie ein Layout festlegen. Fordern Sie ein Muster oder ein Angebot an.

Informationen zur Produktverpackung

Verpackung Tray (Rollenverpackungsoptionen verfügbar)
Kartongröße 32*30*31cm
Menge/Karton 1200Stk
Bruttogewicht/Karton 8.5kg
Vollständige Details anzeigen

For design and sourcing teams

TW1161CNL

Made in Taiwan
Every TeleWire Technology RJ45 jack and MagJack is manufactured in Taiwan.
Footprint and 3D model on request
Request the mechanical drawing, PCB footprint and 3D STEP model together with your sample. Request footprint / STEP
US sales and technical support
Office in California for North American design and sourcing teams.
Long-term supply
No end-of-life is planned for this part. Any change is announced by product change notice before it takes effect. If this part is ever discontinued, customers receive a last-time-buy notice of at least 6 months. Tooling for this part is owned and kept by TeleWire Technology.

Produktspezifikationen

RJ-Typ 8P8C (RJ45)
Anschlüsse 1x1
Geschwindigkeit 10/100 Base-T
Verriegelungstyp Runter
Abschirmung Abschirmung mit EMI-Finger
PCB-Montageart Durchgangsloch
Ausrichtung Rechter Winkel (90°)
AutoMDIX JA
PCB-Material FR4
Kontaktmaterial Gold
Kontaktbeschichtung Gold Flash/ 6u"/ 15u"/ 30u"/ 50u"
Zertifizierung RoHS-konform
Produktlänge (Zoll/mm) 0,839/ 21,30
Produktbreite (Zoll/mm) 0,630/ 16,00
Produkthöhe (Zoll/mm) 0,535/ 13,60
Temperatur 0℃ ~ 70℃
Kompatible Marken Impuls

Kostengünstige Alternativen für RJ45-Buchsen großer Marken

Haben Sie mit langen Lieferzeiten oder hohen Kosten bei großen Steckverbinder-Marken zu kämpfen? Wir bieten hochwertige, austauschbare Ersatzprodukte für Standard-Modularbuchsen von TE, Molex, Amphenol, Würth, Halo, Bel Fuse und Pulse. Unsere Steckverbinder entsprechen den Industriestandards bei Footprint und Leistungsspezifikationen zu einem wettbewerbsfähigeren Preis.

Von Flash, 3µ", 6µ", 15µ", 30µ" bis hin zu 50µ" Goldbeschichtung
Senden Sie uns die Zeichnung für einen äquivalenten Abgleich
Kurze Lieferzeiten und konsistente Fertigung in Taiwan
Zu 100 % auf Kontaktwiderstand und Isolationsintegrität geprüft
Individuelles Angebot anfordern

We reply within 24 hours. No account needed. Your specifications stay confidential; NDA available on request.

What is a Taiwan-made alternative to the Pulse J00-0025NL?
The TW1161CNL from TeleWire Technology cross-references to the Pulse J00-0025NL and to LINK-PP LPJ0050CNL. It is manufactured in Taiwan, giving buyers a supply route outside mainland China for the same footprint. Send the footprint you are designing against and TeleWire Technology will confirm compatibility.
Can the TW1161CNL be built to a different configuration?
Yes. The standard TW1161CNL ships with a tab-down latch. TeleWire Technology can change LED colour, latch direction, contact plating thickness (Gold Flash through 50 microinch) and tray or reel packaging against your drawing, while holding the footprint that matches Pulse J00-0025NL.
How do I qualify the TW1161CNL as a second source?
Request a sample of the TW1161CNL and the mechanical drawing from TeleWire Technology, then check the footprint against the Pulse J00-0025NL on your board. TeleWire Technology builds in Taiwan under an ISO 9001 quality system, and its engineering team will review your drawing before you commit.