• Molex 87568-1074 Milli-Grid 10-pin 2 mm IDC receptacle terminated on both ends of a 28 AWG flat ribbon cable.
  • Dual-end 10-pin 2 mm ribbon cable assembly routed between two stacked PCBs in a rack-mounted controller.
1 2

Molex 87568-1074 10-Pin 2.00mm Pitch Dual-End - Flat Ribbon Cable Assembly

  • Dual-end flat ribbon cable assembly terminated with a Molex Milli-Grid 87568-1074 IDC receptacle on each end, 10 circuits arranged as a 2-row × 5-position configuration on a 2.00 mm × 2.00 mm grid. The receptacles are cable-to-board type with a locking friction ramp, no center polarization key, and 0.76 µm (30 µin) selective gold plating over nickel in the mating interface with tin plating over nickel in the IDT termination area. The assembly is designed as a straight-through (1-to-1) board-to-board jumper between two PCB-mounted Milli-Grid headers.
  • Terminated on 1.00 mm pitch flat ribbon cable, 28 AWG, 7-strand stranded tinned copper, conforming to UL 2651 or UL 2678 (80 °C, 300 V rated cable) per Molex product specification PS-87568-004. Using the specified UL-listed ribbon stock preserves the insulation-displacement contact geometry the 87568 series is qualified against; substitute cable styles are built only on engineering approval.
  • Rated 125 V AC (RMS) / 125 V DC maximum working voltage per Molex PS-87568-004. Housing is PBT glass-filled, black, UL 94 V-0 flammability rated. Contact material is phosphor bronze with gold selective plating in the mating area and tin over nickel in the IDT zone. The part is RoHS 3 compliant (EU 2015/863), REACH SVHC compliant, low-halogen, and lead-free.
  • Custom overall length, ribbon cable style (UL 2651, UL 2678, UL 2643, rainbow or gray), conductor count pre-cut from a wider ribbon, alternative pinout (straight-through, mirrored, or custom pin-mapped), alternative 87568-series housing variant (with or without center polarization key, alternative plating thickness), and shrink-boot or ferrule strain relief available on request — submit a quote request for non-stock configurations.
View full details
Get Free Quote for customization

Can't find what you need?

We specialize in custom sourcing and manufacturing. Upload your spec sheet or drawing, and our engineering team will provide a quote within 24 hours.

Manufacturing of unlisted custom assemblies
Support for complex cable & wire harness assemblies
Rapid prototyping for new designs
Equivalent alternatives for obsolete parts
Same-day engineering review
Request Custom Quote
What information do you need to provide a quote for a custom wire harness?

To provide an accurate quote and lead time, please provide:

  1. Technical Drawing or Diagram: Showing pinouts, lengths, and tolerances.
  2. Bill of Materials (BOM): Listing specific connectors (MPN) and wire gauges (AWG).
  3. Estimated Annual Usage (EAU): Helping us optimize pricing for your volume. Note: If you do not have a formal drawing, our engineering team can help create one based on your physical sample.
Can you suggest cost-saving alternatives for expensive connectors (e.g., TE, Molex, JST)?

Yes. We offer variety of alternative components.

We have extensive supply chain relationships in Taiwan and can suggest"Functionally Equivalent"alternatives that are fully compatible with major brands like TE, Molex, or JST but at a significantly lower cost. We will provide datasheets and samples of the alternative components for your approval before production.

How do you ensure quality control for custom cable assemblies?

Every single cable assembly undergoes rigorous testing before leaving our Taiwan facility. Our standard QC process includes:

  • 100% Continuity Testing: Ensuring no opens, shorts, or miswires.
  • Pull Force Testing: Verifying crimp strength.
  • Visual Inspection: Checking for cosmetic defects and label accuracy.
  • Hi-Pot Testing: Available upon request for high-voltage applications to ensure insulation integrity.