• Amass M15 2-pin high-current connector wired to a Deutsch DT06-2S receptacle wire harness
  • 150A M15 2-pin to 13A Deutsch DT06-2S adapter in 10 AWG silicone wire, IP67-rated mated interface
1 2

Amass M15 2-Pin to Deutsch DT06-2S Battery Power Adapter - Custom Cable Assembly

  • Dual-end power adapter cable terminated with an Amass M15 2-pin high-current connector on one end and a Deutsch DT06-2S 2-way plug housing on the other, bridging a high-current battery interface to a sealed off-highway or industrial signal/power harness.
  • Available in 10, 12, 14, and 16 AWG with high-strand silicone insulation (−65 °C to +200 °C) or PVC where cost dominates, in stock lengths of 6, 12, 18, 24, 36, and 48 inches, with red/black polarity coding and optional green/black or all-black configurations.
  • Amass M15 connector rated 150 A continuous at up to 500 V DC per Amass M-series specification, while the Deutsch DT06-2S is rated 13 A per contact at 500 V DC and sealed to IP67 (IEC 60529) when properly assembled with gland seals and plugs — making the DT interface the current-limiting element and the sealed side of the assembly.
  • Used to deliver main-pack or battery-backed power into DT-connectorized subsystems on off-highway diesel equipment, marine electronics, agricultural telematics, mobile robotics, solar charge controllers, and mezzanine power distribution where one end lives on a chassis-mount high-current bulkhead and the other plugs into a sealed machine harness.
  • Custom wire gauge (8–18 AWG), overall length, silicone or PVC insulation, DT contact plating (tin or gold), backshell and heat-shrink boot options, and inline ATC or MIDI fuse holders available on request — submit a quote request for non-stock builds.
View full details
Get Free Quote for customization

Can't find what you need?

We specialize in custom sourcing and manufacturing. Upload your spec sheet or drawing, and our engineering team will provide a quote within 24 hours.

Manufacturing of unlisted custom assemblies
Support for complex cable & wire harness assemblies
Rapid prototyping for new designs
Equivalent alternatives for obsolete parts
Same-day engineering review
Request Custom Quote
What information do you need to provide a quote for a custom wire harness?

To provide an accurate quote and lead time, please provide:

  1. Technical Drawing or Diagram: Showing pinouts, lengths, and tolerances.
  2. Bill of Materials (BOM): Listing specific connectors (MPN) and wire gauges (AWG).
  3. Estimated Annual Usage (EAU): Helping us optimize pricing for your volume. Note: If you do not have a formal drawing, our engineering team can help create one based on your physical sample.
Can you suggest cost-saving alternatives for expensive connectors (e.g., TE, Molex, JST)?

Yes. We offer variety of alternative components.

We have extensive supply chain relationships in Taiwan and can suggest"Functionally Equivalent"alternatives that are fully compatible with major brands like TE, Molex, or JST but at a significantly lower cost. We will provide datasheets and samples of the alternative components for your approval before production.

How do you ensure quality control for custom cable assemblies?

Every single cable assembly undergoes rigorous testing before leaving our Taiwan facility. Our standard QC process includes:

  • 100% Continuity Testing: Ensuring no opens, shorts, or miswires.
  • Pull Force Testing: Verifying crimp strength.
  • Visual Inspection: Checking for cosmetic defects and label accuracy.
  • Hi-Pot Testing: Available upon request for high-voltage applications to ensure insulation integrity.