제품 정보로 건너뛰기
1 의 3

TW1182AONL 10/100/1000 Base-T RJ45 MagJack, 탭 업(Tab Up), 오렌지&그린/옐로우 LED

TeleWire Technology TW1182AONL은 마그네틱이 통합된 10/100/1000 Base-T EMI 핑거 차폐 RJ45 MagJack입니다. 대만에서 제조되었습니다.

교차 참조(Cross Reference)

  • Bel Fuse 0826-1X1T-23-F — TW1182AONL은 이 부품과 교차 참조됩니다.
  • Bel Fuse L826-1X1T-23-F — 동일한 풋프린트에서 호환되는 추가 제품입니다.
  • Halo HFJT1-1G20C3-L72RL — 동일한 풋프린트에서 호환되는 추가 제품입니다.

선택 시 참고 사항

  • 10/100/1000 Base-T — 해당 라인 속도에 최적화된 마그네틱이 내장되어 있으며, 외부 트랜스포머가 필요하지 않습니다.
  • 오렌지&그린/옐로우 LED — 호스트에서 구동되며, 링크 및 활동 매핑은 사용자가 설정합니다.
  • 통합 마그네틱 — PCB가 아닌 커넥터 내부에 절연 및 공통 모드 초크(common-mode choke)가 포함되어 있습니다.
  • EMI 접지 핑거 — 섀시 베젤에 밀착되어 실드 경로를 형성합니다.

일반적인 용도: 호스트 PHY에서 기가비트 이더넷을 사용하는 싱글 보드 컴퓨터 및 SoM 캐리어 보드.

TW1182AONL의 가격은 주문 수량 및 구성에 따라 미화 $0.50에서 $3.00 사이이며, 대량 주문 시 가격 단계가 적용됩니다.

TW1182AONL을 보드에 먼저 검증하십시오. 설계 검증을 위한 샘플을 제공하며, 레이아웃을 확정하기 전에 기계 도면을 통해 풋프린트를 확인할 수 있습니다. 샘플 또는 견적을 요청하십시오.

제품 포장 정보

포장 방식 트레이 (릴 포장 옵션 가능)
카톤 규격 32*30*31cm
수량/카톤 1200개
총 중량/카톤 8.5kg
전체 세부 정보 보기

For design and sourcing teams

TW1182AONL

Made in Taiwan
Every TeleWire Technology RJ45 jack and MagJack is manufactured in Taiwan.
Footprint and 3D model on request
Request the mechanical drawing, PCB footprint and 3D STEP model together with your sample. Request footprint / STEP
US sales and technical support
Office in California for North American design and sourcing teams.
Long-term supply
No end-of-life is planned for this part. Any change is announced by product change notice before it takes effect. If this part is ever discontinued, customers receive a last-time-buy notice of at least 6 months. Tooling for this part is owned and kept by TeleWire Technology.

제품 사양

RJ 유형 12P8C(RJ45)
포트 1x1
속도 10/100/1000 Base-T
래치 유형 Up
LED Orange&Green/ Yellow
차폐(Shielding) Shield with EMI Finger
PCB 실장 유형 Through Hole
방향 Right Angle (90°)
AutoMDIX Yes
PCB 재질 FR4
접점 재질 금
접점 도금 골드 플래시/ 6u"/ 15u"/ 30u"/ 50u"
인증 RoHS 준수
제품 길이 (인치/mm) 1.280/ 32.50
제품 폭 (인치/mm) 0.654/ 16.60
제품 높이 (인치/mm) 0.531/ 13.50
온도 0℃ ~ 70℃
호환 브랜드 Halo

주요 브랜드 RJ45 잭을 위한 비용 효율적인 대안

주요 커넥터 브랜드의 긴 리드 타임이나 높은 비용으로 고민하고 계신가요? 당사는 TE, Molex, Amphenol, Wurth, Halo, Bel Fuse 및 Pulse의 표준 모듈러 잭을 대체할 수 있는 고품질의 드롭인(drop-in) 제품을 제공합니다. 당사의 커넥터는 업계 표준 풋프린트 및 성능 사양을 충족하며 더욱 경쟁력 있는 가격대를 제공합니다.

Flash, 3µ", 6µ", 15µ", 30µ"에서 50µ"까지의 금도금 옵션
도면을 공유하여 동등한 제품을 확인하세요
짧은 리드 타임 및 대만 내 일관된 제조 공정
접촉 저항 및 절연 무결성에 대한 100% 테스트 완료
맞춤 견적 요청

We reply within 24 hours. No account needed. Your specifications stay confidential; NDA available on request.

What is a Taiwan-made alternative to the Bel Fuse 0826-1X1T-23-F?
The TW1182AONL from TeleWire Technology cross-references to the Bel Fuse 0826-1X1T-23-F and to LINK-PP LPJK0071AONL. It is manufactured in Taiwan, giving buyers a supply route outside mainland China for the same footprint. Send the footprint you are designing against and TeleWire Technology will confirm compatibility.
Which manufacturers' parts does the TW1182AONL replace?
The TW1182AONL cross-references to Bel Fuse 0826-1X1T-23-F; Bel Fuse L826-1X1T-23-F; Halo HFJT1-1G20C3-L72RL; Würth Elektronik 7499111612; Würth Elektronik 7499111612A; Würth Elektronik MIC3111C-0152W-LF3, and to LINK-PP LPJK0071AONL. TeleWire Technology publishes the full cross-reference so a sourcing engineer can qualify one Taiwan-built part against several incumbents at once.
How do I qualify the TW1182AONL as a second source?
Request a sample of the TW1182AONL and the mechanical drawing from TeleWire Technology, then check the footprint against the Bel Fuse 0826-1X1T-23-F on your board. TeleWire Technology builds in Taiwan under an ISO 9001 quality system, and its engineering team will review your drawing before you commit.