방수 케이블 어셈블리

IP67, IP68, IP69K 등급의 차이점
IP67은 1미터 수심에서 30분 동안 침수를 견딜 수 있음을 의미합니다. IP68은 제조사가 지정한 깊이와 시간 동안 1미터 이상의 깊이에서 지속적인 침수를 견딜 수 있습니다. IP69K는 고압 및 고온 세척(80°C에서 80bar)에 대한 저항력을 추가한 등급입니다. TeleWire Technology는 오버몰딩 스트레인 릴리프, M5/ M8/ M12/ M16/ M17 및 M23 원형 커넥터, 포팅 또는 열수축 밀봉 종단 처리를 사용하여 IP67 및 IP68 등급의 방수 케이블 어셈블리를 제작하며, 모든 제품은 출하 전 100% 전기 테스트를 거칩니다. 당사의 ISO 인증 오버몰딩 공정은 방수 밀폐와 우수한 스트레인 릴리프를 보장하여 일반 케이블이 견디지 못하는 환경에서도 누수 없는 신뢰성을 제공합니다.

Taiwan made custom waterproof cable assembly

맞춤형 와이어 하네스 및 케이블 어셈블리를 찾고 계신가요?

기술 요구 사항과 프로젝트 세부 정보를 제출해 주시면, 저희 엔지니어링 팀에서 요청을 검토하고 24시간 이내에 답변해 드리겠습니다.

맞춤 견적 요청

필요한 정확한 케이블을 찾을 수 없으신가요?

저희 웹사이트에는 저희 역량의 일부만 나열되어 있습니다. 온라인에 표시되지 않은 수천 개의 맞춤형 케이블 어셈블리 및 와이어 하네스를 제조합니다. 도면 또는 사양을 여기에 업로드해 주시면 제작해 드리겠습니다.

미등록 맞춤 어셈블리 제조
복잡한 와이어 하네스 지원
신규 설계에 대한 신속한 프로토타이핑
단종된 부품에 대한 동등 대체품
당일 엔지니어링 검토
맞춤 견적 요청

We reply within 24 hours. No account needed. Your specifications stay confidential; NDA available on request.

Manufacturing Standards & Capabilities

ISO 9001 Certified Factory

TeleWire Technology operates under strict ISO 9001 Quality Management Systems. Every production run undergoes rigorous IQC (Incoming Quality Control) and IPQC (In-Process Quality Control) to ensure consistent, OEM-grade reliability for global supply chains.

IPC/WHMA-A-620 Compliance

Our assembly technicians adhere to IPC/WHMA-A-620 standards for cable and wire harness fabrication. We guarantee precision crimp height, pull-force retention, and strain relief integrity for high-vibration automotive and industrial environments.

100% Electrical Testing

Zero defect policy. 100% of finished assemblies undergo automated testing for continuity, shorts, and mis-wiring. For critical safety applications, we provide advanced VSWR testing, high-pot testing, and insertion force validation.

Custom Component Sourcing

We source genuine connectors from Amphenol, TE Connectivity, Molex, and JST, or provide cost-effective, high-quality equivalents to meet your BOM targets. Our engineering team supports rapid prototyping with low MOQs and fast turnaround times.

Have 2D or 3D drawings ready?

Talk to our engineering team for immediate design validation and DFM (Design for Manufacturing) support.

Request Technical Quote →