Ga direct naar productinformatie
1 van 3

TW1129ACNL 10/100 Base-T RJ45 MagJack, Tab Down, Groen/ Groene LED

De TeleWire Technology TW1129ACNL is een 10/100 Base-T EMI-finger afgeschermde RJ45 MagJack met geïntegreerde magnetics. Geproduceerd in Taiwan.

Kruisverwijzing

  • Pulse J0018D21ENL — de TW1129ACNL is een kruisverwijzing naar dit onderdeel.
  • LINK-PP LPJ0018ACNL — dezelfde footprint, geproduceerd buiten het vasteland van China.

Selectienotities

  • 10/100 Base-T — afgestemde magnetics voor deze lijnsnelheid, geen externe transformator nodig.
  • Groen/ Groene LED's — aangegeven status bepaald door het host PHY-ontwerp.
  • Geïntegreerde magnetics — isolatie en common-mode choke in de connector, niet op de PCB.
  • EMI-aardingsvingers — veercontacten verbinden de behuizing met het paneel bij plaatsing.

Typische toepassing: veldapparatuur waar een 100 Mbit/s verbinding de volledige netwerkvereiste is.

De prijzen voor de TW1129ACNL variëren van $0,50 tot $3,00 USD, afhankelijk van de bestelhoeveelheid en configuratie, met volumekortingen beschikbaar op aanvraag.

Valideer de TW1129ACNL eerst op uw printplaat. Monsters zijn beschikbaar voor ontwerpvalidatie en de mechanische tekening toont de footprint voordat u een layout vastlegt. Vraag een monster of offerte aan.

Informatie over productverpakking

Verpakking Tray (haspelverpakkingsopties beschikbaar)
Afmetingen doos 32*30*31cm
Aantal/doos 1200st
Brutogewicht/doos 8.5kg
Alle details bekijken

For design and sourcing teams

TW1129ACNL

Made in Taiwan
Every TeleWire Technology RJ45 jack and MagJack is manufactured in Taiwan.
Footprint and 3D model on request
Request the mechanical drawing, PCB footprint and 3D STEP model together with your sample. Request footprint / STEP
US sales and technical support
Office in California for North American design and sourcing teams.
Long-term supply
No end-of-life is planned for this part. Any change is announced by product change notice before it takes effect. If this part is ever discontinued, customers receive a last-time-buy notice of at least 6 months. Tooling for this part is owned and kept by TeleWire Technology.

Productspecificaties

RJ-type 8P8C(RJ45)
Poorten 1x1
Snelheid 10/ 100 Base-T
Type vergrendeling Down
LED Green/ Green
Afscherming Shield with EMI Finger
Type PCB-montage Through Hole
Oriëntatie Right Angle (90°)
AutoMDIX Yes
PCB-materiaal FR4
Contactmateriaal Goud
Contactplating Gold Flash/ 6u"/ 15u"/ 30u"/ 50u"
Certificering RoHS-conform
Productlengte (Inches/mm) 0.837/ 21.25
Productbreedte (Inches/mm) 0.627/ 15.93
Producthoogte (Inches/mm) 0.524/ 13.30
Temperatuur 0℃ ~ 70℃
Compatibele merken Pulse

Kosteneffectieve alternatieven voor RJ45-jacks van grote merken

Heeft u te maken met lange levertijden of hoge kosten van grote connectormerken? Wij bieden hoogwaardige, direct inzetbare vervangers voor standaard modulaire jacks van TE, Molex, Amphenol, Wurth, Halo, Bel Fuse en Pulse. Onze connectoren komen overeen met de industriestandaard voetafdrukken en prestatiespecificaties tegen een scherpere prijs.

Van Flash, 3µ", 6µ", 15µ", 30µ" tot 50µ" goudplating
Deel de tekening voor een gelijkwaardige match
Korte levertijden en consistente productie in Taiwan
100% getest op contactweerstand en isolatie-integriteit
Vraag een offerte op maat aan

We reply within 24 hours. No account needed. Your specifications stay confidential; NDA available on request.

What is a Taiwan-made alternative to the Pulse J0018D21ENL?
The TW1129ACNL from TeleWire Technology cross-references to the Pulse J0018D21ENL and to LINK-PP LPJ0018ACNL. It is manufactured in Taiwan, giving buyers a supply route outside mainland China for the same footprint. Send the footprint you are designing against and TeleWire Technology will confirm compatibility.
Can the TW1129ACNL be built to a different configuration?
Yes. The standard TW1129ACNL ships with Green/ Green LEDs and a tab-down latch. TeleWire Technology can change LED colour, latch direction, contact plating thickness (Gold Flash through 50 microinch) and tray or reel packaging against your drawing, while holding the footprint that matches Pulse J0018D21ENL.
How do I qualify the TW1129ACNL as a second source?
Request a sample of the TW1129ACNL and the mechanical drawing from TeleWire Technology, then check the footprint against the Pulse J0018D21ENL on your board. TeleWire Technology builds in Taiwan under an ISO 9001 quality system, and its engineering team will review your drawing before you commit.