• Custom XT30 to GX16 aviation connector wire harness made in Taiwan.
  • Electrical cable assembly with tin-plated copper conductors and PVC insulation.
  • ISO certified factory producing custom NGD XT30 wiring harnesses for OEM use.
1 3

Kabel Daya Amass XT30 ke Konektor Penerbangan GX16 2-Pin - Rangkaian Kabel

  • Rangkaian kabel daya 2-pin yang menghubungkan konektor Amass XT30 ke konektor penerbangan berulir GX16 untuk peralatan panel-mount, perlengkapan uji, dan stasiun darat drone.
  • Tembaga kaleng 18, 20, atau 22 AWG dalam PVC atau silikon, panjang 6–36 inci, dengan rumah GX16 2 hingga 10 pin.
  • XT30 memiliki peringkat 15 A kontinu pada 500 V DC; ujung GX16 memiliki peringkat per-pin yang lebih rendah dan membatasi rangkaian kabel.
  • Ujung XT30 menggunakan Amass asli atau setara yang kompatibel buatan Taiwan — sumber alternatif non-Tiongkok.
  • Tersedia pengukur, panjang, jumlah pin GX16, pin-out, dan jenis kelamin konektor khusus — minta penawaran; MOQ 50 pcs, tersedia sampel.
Lihat detail lengkap
Dapatkan Penawaran Gratis untuk kustomisasi

Tidak menemukan yang Anda butuhkan?

Kami memiliki spesialisasi dalam pengadaan dan manufaktur kustom. Unggah lembar spesifikasi atau gambar Anda, dan tim teknik kami akan memberikan penawaran dalam waktu 24 jam.

Manufaktur perakitan kustom yang tidak terdaftar
Dukungan untuk perakitan kabel & wire harness yang kompleks
Pembuatan prototipe cepat untuk desain baru
Alternatif setara untuk suku cadang yang sudah usang
Tinjauan teknis di hari yang sama
Minta Penawaran Kustom

We reply within 24 hours. No account needed. Your specifications stay confidential; NDA available on request.

Is there a non-China alternative to Amass XT30 connectors for this XT30 to GX16 harness?
Yes. TeleWire Technology builds this XT30 to GX16 harness with either genuine Amass XT30 connectors or Taiwan-made compatible connectors that mate with Amass XT30 housings. The Taiwan-made option gives OEM programs a non-China second source for supply-chain diversification without redesigning the mating interface. Samples are available so you can verify mating and fit before a production order (MOQ 50 pcs).
Can an XT30 to GX16 harness be used on drone ground equipment?
Yes. TeleWire Technology builds XT30 to GX16 harnesses for drone ground-station radios, FPV monitors, and field test equipment, where the XT30 plugs into a battery pack and the threaded GX16 locks into a panel-mount input. The GX16 coupling nut resists vibration-induced disconnection better than friction-fit DC connectors.
What limits the current rating of an XT30 to GX16 harness?
The GX16 end is the current-limiting element, because its per-pin rating is lower than the XT30's 15 A continuous rating. Wire gauge (typically 18–22 AWG) is sized to the GX16 contacts, and 2- to 10-pin GX16 housings are available. Share your load current and pin-out in a quote request to confirm the build.