{"title":"Custom Flat Ribbon \u0026 IDC Cable Assembly","description":"\u003ch3\u003eSpace-Saving Parallel Data Routing\u003c\/h3\u003e\n\u003cp\u003eWhen internal chassis vertical clearance is severely limited, standard round wire harnesses are often too bulky. TeleWire Technology solves spatial constraints by manufacturing high-volume Flat Ribbon, FFC (Flexible Flat Cable), and FPC (Flexible Printed Circuit) jumper assemblies, providing low-profile, highly flexible board-to-board signal transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlat Cable Capabilities:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIDC Ribbon Cables (1.27mm \/ 2.54mm Pitch):\u003c\/strong\u003e Mass-terminated multi-conductor cables for cost-effective daisy-chaining and parallel data buses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFC\/FPC Jumpers (0.5mm \/ 1.0mm Pitch):\u003c\/strong\u003e Paper-thin, extreme-flex life jumpers utilized in laptops, consumer electronics, and moving print heads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Folding \u0026amp; Creasing:\u003c\/strong\u003e Precision mechanical folding to navigate complex right-angle chassis corners without stressing internal conductors.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"hirose-df9-31p-31-pin-female-dual-end-flat-ribbon-cable-assembly","title":"Hirose DF9-31P 31-Pin Female Dual End - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eEngineered with dual Hirose DF9 31-position female receptacles integrated onto a continuous flat ribbon architecture, delivering a low-profile 1.0mm mating pitch optimized for VESA-standard LCD board-to-display interconnects.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,0,0\"\u003eConstructed utilizing a uniform, parallel-conductor flat ribbon topology to maintain consistent signal impedance and ensure the simultaneous routing of all 31 pathways without the risk of wire cross-overs or mechanical chafing.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,1,0\"\u003eSupports extensive architectural scalability across the VESA-compliant Hirose DF9 ecosystem, with available standard pin-count configurations encompassing 9, 11, 13, 15, 17, 19, 21, 23, 25, 31, 41, and 51 positions.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,2,0\"\u003eAccommodates precision flat ribbon termination architectures with an operational discrete wire equivalent gauge range spanning AWG #28 to AWG #32, supporting tight bending radii within space-constrained industrial enclosures.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,3,0\"\u003eFeatures the specialized trapezoidal mating interface intrinsic to the Hirose DF9 series, engineered to inherently prevent misinsertion and guarantee structural mating integrity under mechanical stress.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48569043714267,"sku":null,"price":0.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/HiroseDF9-31P31-PinFemaleDualEnd-2.webp?v=1775438572"},{"product_id":"samtec-isdf-20-d-1-27mm-pitch-40-pin-dual-end-flat-ribbon-cable-assembly","title":"Samtec ISDF-20-D 1.27mm Pitch 40-Pin Dual End - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eEngineered as a precision hybrid interconnect, featuring dual Samtec ISDF-20-D 40-position (20 pins per row) double-row socket housings with a 1.27mm (0.050\") mating pitch, cleanly terminated to a continuously extruded parallel flat ribbon cable.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,0,0\"\u003eConstructed by precisely slitting and separating the flat ribbon webbing at the termination ends, allowing individual conductors to be aggressively crimped with high-reliability Samtec CC03 series discrete wire contacts (optimized for AWG #28 and AWG #30).\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,1,0\" id=\"p-rc_462fd5b3bb5f2cd4-39\"\u003e\u003cspan class=\"citation-25 citation-end-25\"\u003eUtilizes the exceptionally robust Samtec Tiger Eye™ multi-finger beryllium copper (BeCu) contact architecture, ensuring continuous signal integrity and actively preventing micro-fretting under severe industrial shock and vibration.\u003csup class=\"superscript\" data-turn-source-index=\"1\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,2,0\"\u003eSupports broad structural scalability across the Samtec ISDF 1.27mm double-row ecosystem, with available housing configurations scaling broadly from 4 up to 100 total positions (2 to 50 positions per row).\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,3,0\"\u003eFeatures an inherently polarized, micro-rugged housing geometry designed to categorically prevent misinsertion and maintain structural mating integrity during complex internal logic routing in space-constrained enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48573231268059,"sku":null,"price":0.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/SamtecISDF-20-D40-Pin1.27mmCustomHybridFlatRibbon.webp?v=1775559681"},{"product_id":"te-connectivity-1-1111196-2-1-27mm-pitch-flat-ribbon-cable-assembly","title":"TE Connectivity 1-1111196-2 1.27mm Pitch - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eEngineered as a high-efficiency mass-terminated interconnect utilizing the TE Connectivity 1-1111196-2 receptacle, optimized for accurately transitioning a standard 1.27mm (0.050\") pitch extruded flat ribbon cable to a 2.54mm (0.100\") double-row mating interface.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,0,0\" id=\"p-rc_f1e72bafb345ef78-122\"\u003e\u003cspan class=\"citation-135 citation-end-135\"\u003eUtilizes robust Insulation Displacement Contact (IDC) technology, allowing all parallel conductors to be simultaneously driven into the precision-engineered tuning-fork contacts, eliminating individual wire stripping and guaranteeing uniform mechanical termination.\u003csup class=\"superscript\" data-turn-source-index=\"1\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,1,0\" id=\"p-rc_f1e72bafb345ef78-123\"\u003e\u003cspan class=\"citation-134 citation-end-134\"\u003eAccommodates continuous flat ribbon webbing engineered with high-temperature insulation profiles (such as AWM 2651), ensuring sustained thermal stability and preventing jacket degradation within demanding industrial or specialized electronic enclosures.\u003csup class=\"superscript\" data-turn-source-index=\"2\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,2,0\"\u003eCalibrated for the precision termination of parallel multi-strand conductors (typically AWG #28), maintaining strictly controlled inter-conductor spacing to provide predictable signal impedance and actively mitigate electromagnetic cross-talk across wide logic buses.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,3,0\"\u003eFeatures integrated central polarizing mechanisms and strain-relief compatibility intrinsic to the TE housing architecture, explicitly designed to prevent reverse insertion and protect the fragile IDC junctions from mechanical fatigue under sustained vibration.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48577483505883,"sku":null,"price":0.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/TEConnectivity1-1111196-21.27mmPitch-1.webp?v=1776391043"},{"product_id":"samtec-ffsd-05-d-1-27mm-pitch-10-pin-flat-ribbon-cable-assembly","title":"Samtec FFSD-05-D 1.27mm Pitch 10-Pin - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eEngineered to fulfill the 1.27mm (0.050\") pitch requirement via the Samtec FFSD-05-D 10-position (2x5) double-row socket housing \u003ci data-index-in-node=\"146\" data-path-to-node=\"4,1,0\"\u003e(Note: The Samtec TCSD series is inherently a 2.00mm pitch interconnect, making the FFSD series the correct sub-miniature alternative)\u003c\/i\u003e.\u003c\/li\u003e\n\u003cli\u003eUtilizes high-efficiency Insulation Displacement Contact (IDC) technology, allowing the parallel AWG #30 multi-strand conductors to be simultaneously driven into the precision contacts, eliminating individual wire stripping and guaranteeing uniform mechanical termination.\u003c\/li\u003e\n\u003cli\u003eFeatures the exceptionally reliable Samtec Tiger Eye™ multi-finger beryllium copper (BeCu) contact architecture, ensuring continuous signal integrity and actively preventing micro-fretting under severe industrial shock and vibration.\u003c\/li\u003e\n\u003cli\u003eAccommodates a strictly controlled, low-profile flat ribbon webbing explicitly designed for tight routing within densely packed consumer electronics, high-speed logic boards, and severely space-constrained industrial enclosures.\u003c\/li\u003e\n\u003cli\u003eIncorporates an integrated polarization notch (key) to intrinsically prevent reverse insertion, alongside optional rugged strain relief configurations to actively protect the fragile IDC junctions from mechanical fatigue and cable pull-out.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48583514325211,"sku":null,"price":0.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/SamtecFFSD-05-D1.27mmPitch10-Pin-2.webp?v=1775812383"},{"product_id":"te-2178712-8-micro-match-8-pin-flat-ribbon-cable-assembly","title":"TE 2178712-8 Micro-Match 8-Pin - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli data-path-to-node=\"4,1,1,0,0\"\u003e\n\u003cb data-path-to-node=\"4,1,1,0,0\" data-index-in-node=\"0\"\u003eConnector Specification:\u003c\/b\u003e Features an 8-position Micro-MaTch male-on-wire connector (TE Connectivity PN 2178712-8) utilizing a 1.27mm (0.050\") pitch for high-density board-to-board routing.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,1,0\"\u003e\n\u003cb data-path-to-node=\"4,1,1,1,0\" data-index-in-node=\"0\"\u003eCable Architecture:\u003c\/b\u003e Constructed with a standardized flat ribbon profile, maintaining precise parallel conductor alignment to ensure consistent impedance and reliable signal integrity.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,2,0\" id=\"p-rc_1b615e238507bf4c-63\"\u003e\n\u003cb data-path-to-node=\"4,1,1,2,0\" data-index-in-node=\"0\"\u003eTermination Methodology:\u003c\/b\u003e\u003cspan class=\"citation-110 citation-end-110\"\u003e Utilizes Insulation Displacement Contact (IDC) technology, bypassing individual wire stripping requirements to establish secure, gas-tight electrical connections.\u003csup class=\"superscript\" data-turn-source-index=\"1\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,3,0\" id=\"p-rc_1b615e238507bf4c-64\"\u003e\n\u003cb data-path-to-node=\"4,1,1,3,0\" data-index-in-node=\"0\"\u003eElectrical \u0026amp; Thermal Tolerances:\u003c\/b\u003e Supports a maximum current rating of 1\u003cspan class=\"citation-109 citation-end-109\"\u003e.3A per contact and operates reliably within a standard thermal window of -30°C to +85°C.\u003csup class=\"superscript\" data-turn-source-index=\"2\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48583566852315,"sku":null,"price":0.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/2178712-8Micro-Match8-Pin-2.webp?v=1775813561"},{"product_id":"amphenol-amw2651-1-27mm-pitch-10-pin-flat-ribbon-cable-assembly","title":"Amphenol AMW2651 1.27mm Pitch 10-Pin - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli data-path-to-node=\"4,1,1,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,1,1,0,0\"\u003eManufacturer Specification:\u003c\/b\u003e Features the Amphenol AMW2651 series flat ribbon architecture, engineered for high-reliability board-to-board interconnect systems.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,1,1,1,0\"\u003eConductor Configuration:\u003c\/b\u003e Built with a 10-pin parallel conductor layout utilizing a precise 1.27mm (0.050\") pitch, optimizing spatial efficiency in dense PCB routing environments.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,1,1,2,0\"\u003eTermination Compatibility:\u003c\/b\u003e Profile designed for seamless integration with standard 1.27mm Insulation Displacement Contact (IDC) connectors, ensuring gas-tight electrical mating without individual wire stripping.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,3,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"4,1,1,3,0\"\u003eStructural Integrity:\u003c\/b\u003e Extruded uniform dielectric jacket maintains exact conductor spacing, mitigating crosstalk and preserving signal integrity across the specified transmission length.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48583571308763,"sku":null,"price":0.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/AmphenolAMW26511.27mmPitch10-Pin-2.webp?v=1775814139"},{"product_id":"molex-92315-2-54mm-pitch-4-pin-flat-ribbon-cable-assembly","title":"Molex 92315 2.54mm Pitch 4-Pin - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli data-path-to-node=\"4,1,1,0,0\"\u003e\n\u003cb data-path-to-node=\"4,1,1,0,0\" data-index-in-node=\"0\"\u003eManufacturer Specification:\u003c\/b\u003e Built to Molex 92315 series specifications, engineered for high-reliability board-to-board signal and power transmission.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,1,0\"\u003e\n\u003cb data-path-to-node=\"4,1,1,1,0\" data-index-in-node=\"0\"\u003eConductor Configuration:\u003c\/b\u003e Features a 4-position parallel conductor layout utilizing an industry-standard 2.54mm (0.100\") pitch, ensuring direct compatibility with standard header and receptacle systems.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,2,0\"\u003e\n\u003cb data-path-to-node=\"4,1,1,2,0\" data-index-in-node=\"0\"\u003eTermination Methodology:\u003c\/b\u003e Profile is optimized for Insulation Displacement Contact (IDC) mass termination, bypassing discrete wire stripping to establish secure, gas-tight electrical connections.\u003c\/li\u003e\n\u003cli data-path-to-node=\"4,1,1,3,0\"\u003e\n\u003cb data-path-to-node=\"4,1,1,3,0\" data-index-in-node=\"0\"\u003eStructural Integrity:\u003c\/b\u003e The extruded flat architecture maintains strict conductor-to-conductor spatial tolerances, regulating nominal impedance and mitigating mechanical stress in compact routing environments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48583613087963,"sku":null,"price":0.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/Molex923152.54mmPitch4-Pin-1.webp?v=1775814899"},{"product_id":"molex-87568-1074-10-pin-2-00mm-pitch-dual-end-flat-ribbon-cable-assembly","title":"Molex 87568-1074 10-Pin 2.00mm Pitch Dual-End  - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eDual-end flat ribbon cable assembly terminated with a Molex Milli-Grid 87568-1074 IDC receptacle on each end, 10 circuits arranged as a 2-row × 5-position configuration on a 2.00 mm × 2.00 mm grid. The receptacles are cable-to-board type with a locking friction ramp, no center polarization key, and 0.76 µm (30 µin) selective gold plating over nickel in the mating interface with tin plating over nickel in the IDT termination area. The assembly is designed as a straight-through (1-to-1) board-to-board jumper between two PCB-mounted Milli-Grid headers.\u003c\/li\u003e\n\u003cli\u003eTerminated on 1.00 mm pitch flat ribbon cable, 28 AWG, 7-strand stranded tinned copper, conforming to UL 2651 or UL 2678 (80 °C, 300 V rated cable) per Molex product specification PS-87568-004. Using the specified UL-listed ribbon stock preserves the insulation-displacement contact geometry the 87568 series is qualified against; substitute cable styles are built only on engineering approval.\u003c\/li\u003e\n\u003cli\u003eRated 125 V AC (RMS) \/ 125 V DC maximum working voltage per Molex PS-87568-004. Housing is PBT glass-filled, black, UL 94 V-0 flammability rated. Contact material is phosphor bronze with gold selective plating in the mating area and tin over nickel in the IDT zone. The part is RoHS 3 compliant (EU 2015\/863), REACH SVHC compliant, low-halogen, and lead-free.\u003c\/li\u003e\n\u003cli\u003eCustom overall length, ribbon cable style (UL 2651, UL 2678, UL 2643, rainbow or gray), conductor count pre-cut from a wider ribbon, alternative pinout (straight-through, mirrored, or custom pin-mapped), alternative 87568-series housing variant (with or without center polarization key, alternative plating thickness), and shrink-boot or ferrule strain relief available on request — submit a quote request for non-stock configurations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48618728095963,"sku":null,"price":0.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/Molex87568-107410-Pin2.00mmPitch-2.webp?v=1776653518"},{"product_id":"te-connectivity-839018-e-minibridge-4-pin-1-27mm-flat-ribbon-cable-assembly","title":"TE Connectivity 839018-E MiniBridge 4-Pin 1.27mm - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eTE Connectivity ERNI MiniBridge Part 839018-E: a factory-assembled 4-position, 1.27 mm single-row flat ribbon cable assembly with an insulation-displacement (IDC\/IDCCS) socket (SFX) connector terminated on each end, on standard PVC ribbon. The assembly is the SRC (Single Row Cable) receptacle-to-receptacle build in the MiniBridge 4-pin configuration and is intended as a board-to-board jumper between two MiniBridge male header mates on separate PCBs.\u003c\/li\u003e\n\u003cli\u003eTerminated on AWG 26, 7-strand tinned-copper flat ribbon on 1.27 mm conductor centers, with the connector system rated for continuous service from -55 °C to +150 °C per the ERNI MiniBridge SRC product specification. The standard PVC ribbon on 839018-E limits the assembled cable to approximately +105 °C; higher-temperature service up to +125 °C is supported by substituting the TPE-ET high-temperature cable variant, available on request.\u003c\/li\u003e\n\u003cli\u003eCustom overall length (shorter or longer than the stock 300 mm), alternative cable variant (standard PVC, high-temperature TPE-ET for +125 °C service, or halogen-free TPE-O), alternative end configuration (single-ended pigtail, socket-to-plug, plug-to-plug), and alternative locking variant (standard friction, red interlocking tool-release, or Koshiri scoop-proof housing) available on request — submit a quote request for non-stock MiniBridge configurations or for volume pricing on the 839018-E.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48618968907995,"sku":null,"price":0.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/TEConnectivity839018-EMiniBridge4-Pin1.27mm.webp?v=1776661402"},{"product_id":"i-pex-20453-030t-cabline-vs-30-pin-0-5mm-pitch-dual-end-flat-ribbon-cable-assembly","title":"I-PEX 20453-030T CABLINE-VS 30-Pin 0.5mm Pitch Dual-End - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eDual-end micro-coaxial cable assembly terminated with an I-PEX 20453-030T CABLINE-VS plug on each end, 30 positions on a 0.5 mm pitch, configured 1:1 (straight-through) on AWG 40 micro-coaxial conductors in a laminated flat-cable form factor. \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt on AWG 40 individually-shielded micro-coaxial cable, with a CABLINE-VS family operating temperature of -20 °C to +85 °C across the connector housing, contact system, and shielding frame. \u003c\/li\u003e\n\u003cli\u003eRated 0.3 A AC\/DC per contact at AWG 40 per the I-PEX CABLINE-VS specification (with derating curves up to 1.0 A per contact when populated with heavier conductors in the family), 50 V AC\/DC working voltage, and qualified for high-data-rate transmission up to 32 Gbps per lane on the CABLINE-VS connector itself — actual aggregate throughput is gated by the cable build, the AWG 40 conductor on this stocked variant being optimized for short to mid-length display links rather than maximum-rate server interconnect. \u003c\/li\u003e\n\u003cli\u003eCustom overall length, alternative cable form factor (laminated flat ribbon-style or round bundled micro-coax), alternative pinout configuration (straight-through 1:1, mirrored, or custom-mapped — including 1:30 unprocessed-pigtail breakouts to bare AWG 28 strands), heavier conductor gauge (AWG 38 or AWG 36 family variants for higher current), pull-bar feature (I-PEX part 2576) for secure mating retention, and shielding\/ground configuration available on request — submit a quote request for non-stock CABLINE-VS configurations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48619039981787,"sku":null,"price":0.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/I-PEX20453-030TCABLINE-VS30-Pin-2.webp?v=1776663516"},{"product_id":"te-connectivity-215083-2-micro-match-12-pin-1-27mm-pitch-flat-ribbon-cable-assembly","title":"TE Connectivity 215083-2 Micro-MaTch 12-Pin 1.27mm Pitch - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eTE Connectivity 215083-2 (TE internal description: MICRO-MATCH MOW.12P): a dual-end flat ribbon cable assembly terminated with a 12-position Micro-MaTch Male-on-Wire (MOW) IDC connector on each end, on standard 1.27 mm pitch, 28 AWG, 12-conductor flat ribbon cable. \u003c\/li\u003e\n\u003cli\u003eBuilt on 1.27 mm (.050 in) centerline 28 AWG (0.08–0.09 mm² conductor cross-section) flat ribbon cable, with a Micro-MaTch Industrial-grade operating temperature range of -40 °C to +105 °C (the red-housing Industrial variant); the alternative black-housing Value-line variant operates from -30 °C to +85 °C and is offered as a build option for cost-sensitive applications where extended temperature range and high vibration durability are not required.\u003c\/li\u003e\n\u003cli\u003eEngineered around the Micro-MaTch contact-spring system that separates contact-force generation from wire termination, preventing the fretting corrosion that is the traditional failure mode in tin-plated IDC connectors under vibration and thermal cycling. The contact's positioning spring absorbs relative movement between male and female contacts caused by vibration and thermal expansion, maintaining gas-tight contact integrity across long service life. \u003c\/li\u003e\n\u003cli\u003eCustom overall length, alternative pin count within the Micro-MaTch family (4, 6, 8, 10, 12, 14, 16, 18, 20 positions), choice of Industrial (red, -40 to +105 °C) or Value-line (black, -30 to +85 °C) housing, alternative end configuration (Male-on-Wire to Male-on-Wire, Male-on-Wire to Female-on-Wire, single-ended pigtail, or terminated to a board header), matched mating PCB header kits, and overlay protection (heat-shrink boot, expandable braid, convoluted loom) available on request — submit a quote request for non-stock Micro-MaTch configurations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48619450958043,"sku":null,"price":0.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/TEConnectivity215083-2Micro-MaTch12-Pin-1.webp?v=1776672173"},{"product_id":"molex-87568-2093-20-pin-2-00mm-pitch-dual-end-flat-ribbon-cable-assembly","title":"Molex 87568-2093 20-Pin 2.00mm Pitch Dual-End - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eDual-end flat ribbon cable assembly terminated with a Molex Milli-Grid 87568-2093 IDC receptacle on each end, 20 circuits arranged as a 2-row × 10-position configuration on a 2.00 mm × 2.00 mm grid. The receptacles are cable-to-board type with a center polarization key and a locking friction ramp, finished with 0.38 µm (15 µin) selective gold plating over nickel in the mating area and tin plating over nickel in the IDT termination area. \u003c\/li\u003e\n\u003cli\u003eTerminated on 1.00 mm pitch flat ribbon cable, 28 AWG, 7-strand stranded tinned copper, conforming to UL 2651 or UL 2678 (80 °C, 300 V rated cable) per Molex product specification PS-87568-004. Using the specified UL-listed ribbon stock preserves the qualified IDT contact geometry; substitute cable styles are built only on engineering approval.\u003c\/li\u003e\n\u003cli\u003eRated 1 A per contact and 125 V AC (RMS) \/ 125 V DC maximum working voltage per Molex PS-87568-004, with Molex's standard temperature-rise methodology referenced to a 30 °C maximum rise over ambient. Housing is PBT glass-filled, black, UL 94 V-0 flammability rated. Contact material is phosphor bronze with single-beam contacts engineered for a long wiping action that breaks through any oxide film at insertion. The part is RoHS 3 compliant (EU 2015\/863), REACH SVHC compliant, low-halogen, and lead-free. Strain relief is available separately and is recommended for high-vibration installations.\u003c\/li\u003e\n\u003cli\u003eCustom overall length, ribbon cable style (UL 2651, UL 2678, UL 2643, rainbow or gray), conductor count pre-cut from a wider ribbon, alternative pinout (straight-through 1-to-20, mirrored, or custom point-to-point pin-mapped), alternative 87568-series housing variant and shrink-boot or strain-relief termination available on request — submit a quote request for non-stock configurations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48619518951643,"sku":null,"price":0.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/Molex87568-209320-Pin2.00mmPitch-1.webp?v=1776672540"},{"product_id":"molex-picoflex-4-pin-1-27mm-pitch-90327-series-dual-end-flat-ribbon-cable-assembly","title":"Molex Picoflex 4-Pin 1.27mm Pitch 90327 Series Dual-End - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eDual-end flat ribbon cable assembly terminated with a Molex Picoflex 90327-series IDT receptacle on each end, 4 circuits in a single-row configuration on a 1.27 mm (.050 in) pitch, built on standard 1.27 mm pitch flat ribbon cable.\u003c\/li\u003e\n\u003cli\u003eTerminated on 1.27 mm pitch flat ribbon cable, 28 AWG, 7-strand stranded copper, with a Picoflex 90327-series operating temperature range of -40 °C to +105 °C across the receptacle housing, contact system, and IDT termination. \u003c\/li\u003e\n\u003cli\u003eRated 1.0 A per contact and 250 V AC working voltage per the Molex Picoflex product specification, with 500 V AC dielectric withstanding voltage (1 minute), 15 mΩ maximum contact resistance, and 1000 MΩ minimum insulation resistance. Housing is 30% glass-filled PBT, white, UL 94 V-0 flammability rated. Contacts are phosphor bronze with tin plating over nickel as the standard finish.\u003c\/li\u003e\n\u003cli\u003eCustom overall length, alternative pin count within the 90327 family (4, 6, 8, 10, 12, 14, 16, 20, 26 circuits), alternative contact plating (tin standard \/ palladium-nickel + gold flash \/ gold for higher cycle counts), matched mating PCB header (Molex 90325 through-hole vertical, 90814 SMT, 90779 high-temperature TH, 91330 low-profile bottom-entry SMT, or 90584 board-in IDT), and shrink-boot or strain-relief termination available on request — submit a quote request for non-stock Picoflex configurations or for matched header-plus-cable kits.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48619636130011,"sku":null,"price":0.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/Molex_Picoflex_90327_4-circuit_1.27_mm-1.webp?v=1776674998"},{"product_id":"te-connectivity-1658621-2-14-pin-2-54mm-pitch-dual-end-flat-ribbon-cable-assembly","title":"TE Connectivity 1658621-2 14-Pin 2.54mm Pitch Dual-End - Flat Ribbon Cable Assembly","description":"\u003cul\u003e\n\u003cli\u003eTE Connectivity 1658621-2 (AMP-LATCH NOVO 14-position receptacle, gold-plated, with center and military polarization, lead-free): a dual-end flat ribbon cable assembly terminated with a 1658621-2 receptacle on each end, 14 circuits in a 2-row × 7-position configuration on a 2.54 mm (0.100 in) pitch, built on standard 1.27 mm conductor centerline, 28 AWG flat ribbon cable. The AMP-LATCH NOVO low-profile housing carries both center and military polarization features, mechanically preventing mis-orientation against any same-pin-count header that lacks both polarization features.\u003c\/li\u003e\n\u003cli\u003eTerminated on 1.27 mm conductor centerline flat ribbon cable, 26 to 28 AWG stranded copper, with an AMP-LATCH NOVO operating temperature range of -65 °C to +105 °C across the housing, contact system, and IDC termination. \u003c\/li\u003e\n\u003cli\u003eRated 1.0 A per contact, 250 V AC working voltage, with 5000 MΩ minimum insulation resistance and the housing flammability rated UL 94 V-0. The IDC contact accepts mating headers or pin connectors with 0.64 mm (0.025 in) square or round posts of 4.44–6.22 mm (0.175–0.245 in) length, which covers the standard pin geometry of TE's full 2.54 mm header range and competitive equivalents.\u003c\/li\u003e\n\u003cli\u003eSpecified for industrial PLC and motion-controller backplane wiring; server, switch, and router internal harnessing; telecom rack interconnect; instrument and test-equipment chassis wiring; medical electronic backplanes; military and aerospace ground-support equipment; broadcast and pro-AV infrastructure; and any 2.54 mm IDC ribbon application.\u003c\/li\u003e\n\u003cli\u003eCustom overall length, alternative pin count within the AMP-LATCH NOVO family (10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 positions), choice of plating (gold as on this SKU, or tin-plated equivalent 1658622-2 family), polarization variant (military only, military + center as on this SKU, or dual polarization), receptacle cover style (feed-through or end-of-line), matched mating PCB header kit, matched 499252-series strain relief, and overlay protection (shrink boot, expandable braid, convoluted loom) available on request.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeleWire Technology","offers":[{"title":"Default Title","offer_id":48619706417371,"sku":null,"price":0.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/files\/noname-1.webp?v=1776677462"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/0231\/1387\/collections\/Flat_Cable_Assembly.webp?v=1775780613","url":"https:\/\/www.telewiretech.com\/collections\/custom-flat-ribbon-idc-cable-assembly.oembed","provider":"TeleWire Technology Co., Ltd","version":"1.0","type":"link"}